Motorola Symbol Ds3578 User Manual

SYMBOL DS3578  
Quick Start Guide  
See Product Reference Guide for more information  
3
Cradle Insertion  
1
2
2
4
1 Tether Plate  
2 LED Indicators  
3 Scan Window  
4 Scan Trigger  
Caution: Symbol DS3478 cordless scanners are incompatible with  
Symbol STB3508/3578 cradles. Symbol DS3578 cordless scanners are  
incompatible with Symbol STB3408/3478 cradles.  
BATTERY INSERTION/REMOVAL  
3
4
1
2
Or use coin  
Or use coin  
HOST INTERFACES  
NOTE: Cables may vary depending on configuration. When using an external power supply, place the  
ferrite core on the power cable, insert the power supply cable into the cradle, then insert the  
host cable. Connect AC power last.  
RS-232  
Keyboard Wedge  
Cable Connection at Cradle  
Ferrite Core  
Power  
Host  
USB  
IBM 46XX  
TROUBLESHOOTING  
Please refer to the Symbol DS3578 Product Reference Guide Troubleshooting section for further information.  
Scanner not decoding bar code  
Scanner not working  
Scanner not programmed  
for bar code type  
Bar code unreadable  
No power to scanner  
End cap not secured correctly  
Ensure bar code is not defaced;  
try scanning test bar code of same  
bar code type  
Check battery  
Turn end cap to secure  
Ensure scanner is programmed  
to read type of bar code being  
scanned  
Scanned data incorrectly displayed on host  
Scanner decoding bar code, but data not transmitting to host  
Paired cradle host communication parameters do not match the host’s parameters  
Scanner not paired to host-connected cradle  
Cradle not programmed for correct host interface  
Interface cable is loose  
Check scanner host parameters or  
edit options  
Check for loose cable  
connections  
Check cradle host parameters or edit options  
Pair the scanner to the cradle (using the  
PAIR bar code on the cradle)  
If data is still not transmitting to host, it may be necessary to recycle power on the cradle.  
SYMBOL DS3578 PROGRAMMING BAR CODES  
IBM 46XX Host Types  
Radio Communications Host Types  
Set Defaults  
Note: The scanner connection to the cradle  
is dissolved when Set Defaults is scanned.  
PORT 5B  
CRADLE HOST  
SET DEFAULTS  
PORT 9B  
Unpairing/Disconnection  
SERIAL PORT PROFILE (SLAVE)  
Keyboard Wedge Host Types  
UNPAIR/DISCONNECT  
IBM PC/AT and IBM PC COMPATIBLE  
BLUETOOTH KEYBOARD EMULATION (HID SLAVE)  
USB Host Types  
Carriage Return/Line Feed  
HID KEYBOARD EMULATION  
SCAN OPTIONS  
SERIAL PORT PROFILE (MASTER)  
<DATA><SUFFIX>  
IBM HAND-HELD USB  
ENTER  
RS-232 Host Types  
NIXDORF RS-232 MODE A  
NIXDORF RS-232 MODE B  
STANDARD RS-232  
OPOS/JPOS  
ICL RS-232  
FUJITSU RS-232  

Lexmark Prestige 805 User Manual
Omnitron Systems Technology Mah 200 User Manual
Panasonic Cw A120vr User Manual
Panasonic Cw C202kr User Manual
Samsung As24w User Manual
Sanyo Twicell Hf C1u User Manual
Sharp All In One Printer Mx 3500n User Manual
Sigma Ks 1018 User Manual
White Rodgers Mcd1200w User Manual
York Sunline 2000 D7cg 060 User Manual